Maximator® high pressure extruder

There are three models of the Maximator® high pressure extruder: HPE 12.0 – 100 (0.1 – 3 liter), HPE 12.0 – 1000 CE (10 - 50 liter) and HPE 12.0 – 50 CE (0.05 – 1.5 liter).
Maximator® high pressure extruders for larger batch sizes are available upon request.

Model HPE 12.0 - 100

Maximator® model HPE 12.0 - 100

Standard small-scale continuous high pressure extruder for production of liposome batches between approximately 0.1 – 3 liter. The basic model comes without CE certification and does not require any electricity for use. Alternatively, a CE certified version is available (i.e. Model HPE 12.0 – 100 CE) which is additionally equipped with an emergency stop switch which requires electricity.

Special features of the Maximator® HPE 12.0 - 100:

  • Simple recirculation without opening of a pressure chamber
  • Fast exchange of membranes for sequential extrusion
  • Ability to control product temperature
  • Applicable for the generation of sterile preparations
  • Easy to clean without need for disassembly (except for filter holder)

Technical specifications

Model HPE 12.0 – 1000 CE

Customized Maximator® high-pressure extruder

Large-scale continuous high pressure extruder equipped with an emergency stop switch for the production of liposome batches between approximately 10 and 50 liter. This extruder is routinely equipped with an emergency stop switch so that it always comes with CE certification.

Model HPE 12.0 – 50 CE

Maximator® model HPE 12.0 - 100

Compact small-scale continuous high pressure extruder for production of liposome batches between approximately 0.05 – 1.5 liter. This model is equipped with a pneumatic emergency stop switch so that it does not require electricity for use.

Full operating instructions are supplied with each unit which need to be carefully read before first use of the Maximator® high pressure extruder.

Please contact CPL SACHSE for further information on our Maximator® product line or on high pressure extrusion for specific applications.

Note: The Maximator® high pressure extruders have formerly been distributed by DISPEX Disperse Systeme GmbH, Berlin, Germany.